- per page
J2000A Injector Bundle #1
The Picotest J2000A Injector Bundle #1 enables you to:
- perform traditional stability analysis of Power Supplies
- PSRR Measurements
- adding a DC Bias to AC signal sources
- ...
at great discounted price in comparison to purchasing the injectors separately.
Our price: $4500.00
J2000A Injector Bundle #2
The Picotest J2000A Injector Bundle #2 enables you to perform the following measurements in combination with your Bode 100:
- traditional and non-invasive stability of power supplies
- output and input impedance of power supplies
- PSRR measurements
-
Battery impedance measurements
-
...
at a great discounted price in comparison to purchasing the injectors separately.
Our price: $3800.00
J2100A Wideband Injection Transformer
frequency range: 1 Hz - 5 MHz
tested according to 600 V CAT II
tested according to 600 V CAT II
Our price: $525.00
J2101A Wideband Injection Transformer
frequency range: 10 Hz - 45 MHz
tested according to 600 V CAT II
tested according to 600 V CAT II
Our price: $525.00
J2102A Common Mode Transformer
Greatly attenuates the effects
of low frequency ground loops
Supports the 2 Port Shunt Thru impedance
measurements required for Power Distribution Networks (PDN's)
Maintains 50 Ohm transmission line integrity
to approximately
500 MHz
Works with all types of test equipment to
eliminate ground loops, such as Networks Analyzers, Oscilloscopes
and Spectrum Analyzers
500 MHz
Our price: $525.00
J2110A Solid State Voltage Injector
injects voltages into control loops (e.g. for stability analysis)
frequency range: DC - 45 MHz
delivered with 2170A High PSRR Power Adapter
frequency range: DC - 45 MHz
delivered with 2170A High PSRR Power Adapter
Our price: $1500.00
J2111A Solid State Current Injector
injects currents into electronic circuits (e.g. for output impedance measurements)
frequency range: DC - 45 MHz
delivered with J2170A High PSRR Power Adapter
frequency range: DC - 45 MHz
delivered with J2170A High PSRR Power Adapter
Our price: $1500.00
J2120A Line Injector
adds an AC Signal to supply voltages (e.g. for PSRR measurements)
low loss design
frequency range: 10 Hz - 10 MHz
low loss design
frequency range: 10 Hz - 10 MHz
Our price: $525.00
J2130A DC Bias Injector
adds a DC Bias to an AC signal (e.g. for capacitance measurements with DC offset)
low loss design
frequency range: 10 Hz - 10 MHz
low loss design
frequency range: 10 Hz - 10 MHz
Our price: $525.00
J2140A Attenuator
includes 40 dB, 20 dB and 10 dB attenuator
impedance: 50 Ohms
cascade able to reach higher attenuation
impedance: 50 Ohms
cascade able to reach higher attenuation
Our price: $250.00
J2180A Ultra Low Noise Preamp
adds 20 dB gain
minimizes circuit loading
frequency range: 0.1 Hz – 100 MHz
delivered with J2170A High PSRR Power Adapter
minimizes circuit loading
frequency range: 0.1 Hz – 100 MHz
delivered with J2170A High PSRR Power Adapter
Our price: $1995.00
VRTS01 Voltage Regulator Test Standard
Box Contents:
(1) Component 1 BJT 2N3904
(1) Component 2 Schottky Diode SR105-T
(1) Capacitor 1 100uF Tantalum
(1) Capacitor 2 0.1uF Ceramic
(1) Capacitor 3 100uF Electrolytic
(1) Capacitor 4 2.2uF Tantalum
(1) Capacitor 5 15uF Tantalum
(1) Capacitor 6 22uF Ceramic
(1) Fixed Regulator TLV2217 (3.3V)
(1) Adjustable Regulator LM317 (3.3V)
(1) Main Board
(11) Blank Boards: Regulator, Component, Capacitor
(1) Documentation CD
with OMICRON Lab Bode 100A Test Setup Files
Our price: $300.00
- per page
