Home :: Products Map

Products Map

A B D E L M O P R S T V


PICOTEST - J2000A Injector Bundle #1
The Picotest J2000A Injector Bundle #1 enables you to:
  • perform traditional stability analysis of Power Supplies
  • PSRR Measurements
  • adding a DC Bias to AC signal sources
  • ...
at great discounted price in comparison to purchasing the injectors separately.



€ 4.290,00
Qty
PICOTEST - J2000A Injector Bundle #2
The Picotest J2000A Injector Bundle #2 enables you to perform the following measurements in combination with your Bode 100:
  • traditional and non-invasive stability of power supplies
  • output and input impedance of power supplies
  • PSRR measurements
  • Battery impedance measurements
  • ... 
at a great discounted price in comparison to purchasing the injectors separately.

€ 3.690,00
Qty
PICOTEST - J2000A Injector Bundle #3
The Picotest J2000A Injector Bundle #3 enables you to perform the following measurements in combination with your Bode 100:
  • traditional and non-invasive stability of power supplies
  • output and input impedance of power supplies
  • PSRR measurements
  • Battery impedance measurements
  • ... 
at a great discounted price in comparison to purchasing the injectors separately.

€ 2.490,00
Qty
PICOTEST - J2100A Wideband Injection Transformer
frequency range: 1 Hz - 5 MHz
tested according to 600 V CAT II
€ 539,00
Qty
PICOTEST - J2101A Wideband Injection Transformer
frequency range: 10 Hz - 45 MHz
tested according to 600 V CAT II
€ 539,00
Qty
PICOTEST - J2102A Common Mode Transformer
  • Greatly attenuates the effects of low frequency ground loops
  • Supports the 2 Port Shunt Thru impedance measurements required for Power Distribution Networks (PDN's)
  • Maintains 50 Ohm transmission line integrity to approximately 500 MHz
  • Works with all types of test equipment to eliminate ground loops, such as Networks Analyzers, Oscilloscopes and Spectrum Analyzers
€ 539,00
Qty
PICOTEST - J2110A Solid State Voltage Injector
injects voltages into control loops (e.g. for stability analysis)
frequency range: DC - 45 MHz
delivered with 2170A High PSRR Power Adapter
€ 1.450,00
Qty
PICOTEST - J2111A Solid State Current Injector
injects currents into electronic circuits (e.g. for output impedance measurements)
frequency range: DC - 45 MHz
delivered with J2170 High PSRR Power Adapter
€ 1.450,00
Qty
PICOTEST - J2120A Line Injector
adds an AC Signal to supply voltages (e.g. for PSRR measurements)
low loss design
frequency range: 10 Hz - 10 MHz
€ 539,00
Qty
PICOTEST - J2130A DC Bias Injector
adds a DC Bias to an AC signal (e.g. for capacitance measurements with DC offset)
low loss design
frequency range: 10 Hz - 10 MHz
€ 539,00
Qty
PICOTEST - J2140A Attenuator
includes 40 dB, 20 dB and 10 dB attenuator
impedance: 50 Ohms
cascade able to reach higher attenuation
€ 279,00
Qty
PICOTEST - J2180A Ultra Low Noise Preamp
adds 20 dB gain
minimizes circuit loading
frequency range: 0.1 Hz – 100 MHz
delivered with J2170B High PSRR Power Adapter
€ 1.890,00
Qty
PML 111O Passive Probe

The PML 111O is a passive 10:1 probe manufactured by PMK, optimized for the use with Bode 100. Use the PML 111O to:

  • Perform highly accurate loop gain measurements
  • Reduce capacitive loading of your circuit
  • Protect the input channels of your Bode 100
€ 176,00
Qty
Power over Ethernet Power Supply (PoE Injector)
Input: 100-240V, AC
Output: 56V, DC
€ 75,00
Qty