Home :: Bode 100 :: Picotest Injectors

Picotest Injectors

Products

J2000A Injector Bundle #1
The Picotest J2000A Injector Bundle #1 enables you to:

  • perform traditional stability analysis of Power Supplies
  • PSRR Measurements
  • adding a DC Bias to AC signal sources
  • ...

at great discounted price in comparison to purchasing the injectors separately.
 

$4500.00
 
(0 reviews)  
Qty
J2000A Injector Bundle #2
The Picotest J2000A Injector Bundle #2 enables you to perform the following measurements in combination with your Bode 100:

  • traditional and non-invasive stability of power supplies
  • output and input impedance of power supplies
  • PSRR measurements
  • Battery impedance measurements
  • ... 

at a great discounted price in comparison to purchasing the injectors separately.

$3800.00
 
(0 reviews)  
Qty
J2000A Injector Bundle #3

The Picotest J2000A Injector Bundle #3 enables you to perform the following measurements in combination with your Bode 100: 

  • traditional and non-invasive stability of power supplies
  • output and input impedance of power supplies
  • PSRR measurements
  • Battery impedance measurements
  • ...  

at a great discounted price in comparison to purchasing the injectors separately. 

$2500.00
 
(0 reviews)  
Qty
J2100A Wideband Injection Transformer
frequency range: 1 Hz - 5 MHz
tested according to 600 V CAT II
$525.00
 
(0 reviews)  
Qty
J2101A Wideband Injection Transformer
frequency range: 10 Hz - 45 MHz
tested according to 600 V CAT II
$525.00
 
(0 reviews)  
Qty
J2102A Common Mode Transformer
  • Greatly attenuates the effects of low frequency ground loops
  • Supports the 2 Port Shunt Thru impedance measurements required for Power Distribution Networks (PDN's)
  • Maintains 50 Ohm transmission line integrity to approximately
    500 MHz
  • Works with all types of test equipment to eliminate ground loops, such as Networks Analyzers, Oscilloscopes and Spectrum Analyzers
  • $525.00
     
    (0 reviews)  
    Qty
    J2110A Solid State Voltage Injector
    injects voltages into control loops (e.g. for stability analysis)
    frequency range: DC - 45 MHz
    delivered with J2170B High PSRR Power Adapter
    $1500.00
     
    (0 reviews)  
    Qty
    J2111A Solid State Current Injector

    injects currents into electronic circuits (e.g. for output impedance measurements)
    frequency range: DC - 45 MHz
    delivered with J2170B High PSRR Power Adapter

    $1500.00
     
    (0 reviews)  
    Qty
    J2120A Line Injector
    adds an AC Signal to supply voltages (e.g. for PSRR measurements)
    low loss design
    frequency range: 10 Hz - 10 MHz
    $525.00
     
    (0 reviews)  
    Qty
    J2130A DC Bias Injector
    adds a DC Bias to an AC signal (e.g. for capacitance measurements with DC offset)
    low loss design
    frequency range: 10 Hz - 10 MHz
    $525.00
     
    (0 reviews)  
    Qty
    J2140A Attenuator
    includes 40 dB, 20 dB and 10 dB attenuator
    impedance: 50 Ohms
    cascade able to reach higher attenuation
    $250.00
     
    (0 reviews)  
    Qty
    J2180A Ultra Low Noise Preamp
    adds 20 dB gain
    minimizes circuit loading
    frequency range: 0.1 Hz – 100 MHz
    delivered with J2170B High PSRR Power Adapter
    $1995.00
     
    (0 reviews)  
    Qty