The Bode 100 is used to perform several measurements at the electronics laboratory of the Regensburg University of Applied Sciences. The following documents, guiding through the lab lessons are available for download:

Bode 100 Quickstart for Spectrum Analysis
This is a short introduction how to generate bode plots using the Bode 100 and how to deal with the calibration of the Bode 100.

Including the solutions:

Laboratory 1: Analog Systems of 1. and 2. Order
This document deals with the theory of first and second order systems and their signal transfer functions.
Furthermore the stability of the systems is discussed and an introduction on SPICE simulation is given.
In the hands on section the Bode 100 is used to measure the gain/phase of electronic circuits. Errors in the feedback path are evaluated using the B-WIT injection transformer.

Including the solutions:

Laboratory 2: Delta-Sigma Modulation
This document gives an insight on quantization noise, oversampling and delta sigma modulation. The Bode 100 is used for gain/phase measurements and in addition as a spectrum analyzer.

Including the solutions: